The *pipeline output directory* described in [Outputs Overview](/support/software/xenium-ranger/latest/analysis/outputs/XR-output-overview) contains all of the data produced by one invocation of a pipeline (a *pipestance*) as well as rich metadata describing the characteristics of each stage. This directory contains a specific structure used by the [Martian](http://martian-lang.org) pipeline framework to track the state of the pipeline as execution proceeds.

<LinkableSection id={"overview"} title={"Overview"}>

Xenium Ranger's notion of a pipeline is very flexible in that a pipeline can be composed of *stages* that run *stage code* or *sub-pipelines* that may themselves contain stages or sub-pipelines.

Xenium Ranger pipelines follow the convention that stages are named with verbs (such as, `MERGE_METRICS`, `SELECT_CELLS_DATASET`) and sub-pipelines are named with nouns and prefixed with an underscore (e.g., `_CELL_SEGMENTOR_FINALIZER`). Each stage runs in its own directory bearing its name, and each stage's directory is contained within its parent pipeline's directory.

For example, the `xeniumranger resegment` pipeline begins with the following process graph:

<Image src={"https://cdn.10xgenomics.com/image/upload/v1711153053/software-support/Xenium-Ranger/resegment_graph_example.png"} />

where

- `XR_PREFLIGHT` is a _preflight stage_, which validates inputs prior to running the other stages.
- `XENIUM_RANGER_CS` is the *top-level pipeline stage*
- `XR_RESEGMENT` is a *sub-pipeline* contained in `XENIUM_RANGER_CS`. The `SEGMENT_NUCLEI`, `SETUP_CELL_SEGMENTOR_FINALIZER` _stages_ are contained in the `XR_RESEGMENT` _sub-pipeline_.

</LinkableSection>

<LinkableSection id={"directory-structure"} title={"Directory structure"}>

Every pipestance operates wholly inside of its pipeline output directory. When the pipestance completes, this pipestance output directory contains three outputs: metadata files, the pipestance output file directory, and the top-level pipeline stage directory.

- **Metadata files** are files prefixed with an underscore (`_`) and usually contain unstructured text or JSON-encoded arrays and hashes.
- The **pipestance output file directory** is a directory called `outs/` that contains the pipestance's output files.
- The **top-level pipeline stage directory** is a directory named according to the top-level pipeline stage that contains the child *stage directories* that compose this pipestance.

The *top-level pipeline stage* directory is a *stage directory* that contains any number of child stage directories as well as one *stage output directory* for each *fork* run by that stage. There is one possible top-level pipeline stage, `Xenium_Ranger_CS`.

All Xenium Ranger pipelines contain only single-fork stages, so there is only one `fork0` *stage output directory* within each *stage directory*. *Chunk output directories* are a subset of *stage output directories* that additionally contain runtime information specific to the job or process being run by that chunk such as a process ID or cluster job ID.

For example, any of the Xenium Ranger pipelines' *pipeline output directory* contains the following directory structure:

| | |
| -------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------ |
| Files beginning with an underscore, `_` | Metadata files (described [below](/support/software/xenium-ranger/latest/advanced/pipestance-structure#commonly-generated-metadata)) |
| `outs/` | Pipestance [output file directory](/support/software/xenium-ranger/latest/analysis/outputs/XR-output-overview) |
| `XENIUM_RANGER_CS/` | Top-level pipeline stage directory |
| `INSITU_COUNTER_CS/fork0/` | One of the stage output directories in `XENIUM_RANGER_CS/` |
| `INSITU_COUNTER_CS/fork0/files/` | Stage output files |
| `INSITU_COUNTER_CS/fork0/CREATE_METRICS_SUMMARY_CSV_CS/` | Stage directory |
| `INSITU_COUNTER_CS/fork0/CREATE_METRICS_SUMMARY_CSV_CS/fork0/chnk0/` | Chunk output directory |

</LinkableSection>

<LinkableSection id={"commonly-generated-metadata"} title={"Commonly generated metadata"}>

The metadata contained in the *pipeline output directory* includes:

| **File Name** | **Description** |
| ------------- | ------------------------------------------------------------------------------------------------------------------------------------------ |
| `_cmdline` | The command line code used to run analysis. |
| `_finalstate` | Metadata cache that is populated when a pipestance completes to minimize re-aggregation of metadata. |
| `_invocation` | The MRO call used to invoke this pipestance. |
| `_jobmode` | Job mode specified by `--jobmode`. |
| `_log` | The log messages that are reported to your terminal window when running `xeniumranger` commands. |
| `_mrosource` | The entire MRO describing the pipeline with all `@include` statements dereferenced. |
| `_perf` | Detailed runtime performance data for every stage in the pipestance. |
| `_sitecheck` | System compatibility information. |
| `_timestamp` | The start and finish time for this pipestance. |
| `_uuid` | Unique ID for the analysis pipestance. |
| `_vdrkill` | A list of all of the volatile data (temporary files) removed during pipeline execution as well as total number of files and bytes deleted. |
| `_versions` | Versions of the components used by the pipeline. |

*Stage directories* contain *stage output directories*, *stage output files*, and the *stage directories* of any child stages or pipelines.

*Stage output directories* typically contain:

| **File Name** | **Contents** |
| ------------- | ------------------------------------------------------------------------------------------------------------------------------------------ |
| `files/` | Directory containing any files created by this stage that were not considered volatile (temporary). |
| `split/` | A special *stage output directory* for the step that divided this stage's input into parallel chunks. |
| `chnkN/` | A *chunk output directory* for the Nth parallel chunk executed. |
| `join/` | A special *stage output directory* for the step that recombined this stage's parallel output chunks into a single output dataset again. |
| `_complete` | A file that, when present, signifies that this stage has successfully completed. |
| `_errors` | A file that, when present, signifies that this stage failed. Contains the errors that resulted in stage failure. |
| `_invocation` | The MRO call used to execute this stage by the Martian framework. |
| `_outs` | The output files generated by this stage. |
| `_vdrkill` | A list of all of the volatile data (temporary files) removed during pipeline execution as well as total number of files and bytes deleted. |

*Chunk output directories* are a subset of *stage output directories* that, in addition to the aforementioned stage output, may contain:

| **File Name** | **Contents** |
| ------------- | --------------------------------------------------------------------------------------------------------------------------------------- |
| `_args` | The arguments passed to the stage's *stage code*. |
| `_jobinfo` | Metadata describing the stage's execution, including performance metrics, job manager jobid and jobname, and process ID. |
| `_jobscript` | The script submitted to the cluster job manager ([cluster mode](/support/software/xenium-ranger/latest/advanced/XR-cluster-mode)-only). |
| `_stdout` | Any *stage code* output that was printed to the stdout stream. |
| `_stderr` | Any *stage code* output that was printed to the stderr stream |

Metadata files should be treated as read-only. Altering the contents of metadata files is not recommended.

</LinkableSection>

<LinkableSection id={"navigating-pipestances"} title={"Navigating pipestances"}>

Pipestance output directories can demonstrate very complicated structures, and re-attaching the [Xenium Ranger UI](/support/software/xenium-ranger/latest/advanced/XR-pipeline-monitoring-ui) is the easiest way to quickly navigate to a pipeline stage of interest and examine its metadata. In the absence of being able to access the UI, the standard `find` command can quickly return high-level information about a pipestance.

For example, to find the stages that resulted in the overall failure of a pipestance whose output directory is `sample345/`,

```
find sample345/ -name _errors

# Example output
# sample345/XENIUM_RANGER_CS/INSITU_COUNTER_CS/INSITU_COUNTER_CORE/INSITU_ANALYZER/SUMMARIZE_ANALYSIS/fork0/_errors
...
```

This indicates that the failed stage was `SUMMARIZE_ANALYSIS`.

It is helpful to view all `_errors` files' contents at once by piping to `xargs cat`:

```
find sample345/ -name _errors | xargs cat
```

In the above case, the error is an unhandled exception without obvious cause. Failures such as this should be reported to [the 10x Genomics software support team](support@10xgenomics.com) for assistance with diagnosis.

</LinkableSection>

Learn the specific structure used by the Martian pipeline framework to track the state of the pipeline as execution proceeds

Pipestance Structure

Cluster mode is one of three primary ways of running Xenium Ranger. To learn about the other approaches, please go to the computing options page.

<LinkableSection id={"overview"} title={"Overview"}>

Xenium Ranger can be run in _cluster mode_ using Slurm to run the stages on _multiple_ nodes via batch scheduling. This allows highly parallelizable stages to utilize hundreds or thousands of cores concurrently, dramatically reducing time to solution.

<DocumentCallout>
<Text as={"span"}>10x Genomics does not officially support Torque/PBS, SGE, or LSF. They are unsupported and may require trial and error to use.</Text>
</DocumentCallout>

<Image src={"https://cdn.10xgenomics.com/image/upload/v1679522871/software-support/Spatial-GEX/Sustaining/cluster_mode.png"} />

 

Running pipelines in _cluster mode_ requires the following:

1. Xenium Ranger is installed in the same location on all nodes of the cluster. For example, `/opt/xeniumranger-xenium2.0` or `/net/apps/xeniumranger-xenium2.0`
2. Xenium Ranger pipelines are run on a shared file system accessible to all nodes of the cluster. NFS-mounted directories are the most common solution for this requirement.
3. The cluster accepts both single-core and multi-threaded (shared-memory) jobs.

</LinkableSection>

<LinkableSection id={"cluster-template"} title={"Configuring cluster template"}>

Installing the Xenium Ranger software on a cluster is identical to installation on a local server. After confirming that the `xeniumranger` commands can run in _single server_ mode, configure the _job submission template_ that Xenium Ranger uses to submit jobs to the cluster. Assuming Xenium Ranger is installed to `/opt/xeniumranger-xenium2.0`, the process is as follows.

**Step 1.** Navigate to the Martian runtime's `jobmanagers` directory which contains example jobmanager templates.

```
cd /opt/xeniumranger-xenium2.0/external/martian/jobmanagers

ls

# output:
# bsub.template.example config.json slurm.template.example
```

**Step 2.** Make a copy of the cluster's example template to `.template` in the `jobmanagers/` directory.

```
cp -v slurm.template.example slurm.template

# output:
# slurm.template.example -> slurm.template

ls

# output:
# bsub.template.example config.json slurm.template slurm.template.example
```

The job submission templates contain a number of special variables that are substituted by the Martian runtime when each stage is submitted. Specifically, the following variables are expanded when a pipeline is submitting jobs to the cluster.

| **Variable** | **Must be present?** | **Description** |
| -------------------------------------------------------------- | -------------------- | -------------------------------------------------------------------------- |
| `__MRO_JOB_NAME__` | Yes | Job names composed of the sample ID and stage being executed |
| `__MRO_THREADS__` | No | Number of threads required by the stage |
| `__MRO_MEM_GB__` `__MRO_MEM_MB__` | No | Amount of memory (in GB or MB) required by the stage |
| `__MRO_MEM_GB_Per_THREAD__` `__MRO_MEM_MB_Per_THREAD__` | No | Amount of memory (in GB or MB) rquired per thread in multi-threaded stages |
| `__MRO_STDOUT__` `__MRO_STDERR__` | Yes | Paths to the `_stdout` and `_stderr` metadata files for the stage |
| `__MRO_CMD__` | Yes | Bourne shell command to run the stage code |

**It is critical that the special variables listed as required are present in the final template you create.** For more information on how the template should appear for a cluster, consult your cluster administrator or help desk.

</LinkableSection>

<LinkableSection id={"template-considerations"} title={"Additional template considerations"}>

Considerations for the different job schedulers are listed below.

**SGE template:**

For SGE cluster, you MUST replace `<pe_name>` within the example template to reflect the name of the cluster's multi-threaded parallel environment. To view a list of the cluster's parallel environments, use the `qconf -spl` command.

The most common modifications to the job submission template include adding additional lines to specify:

1. The research group's queue. For example, `#$ -q smith.q`
2. The account to which jobs will charge. For example, `#$ -A smith_lab`

**LSF template:**

The most common modifications to the job submission template include adding additional lines to specify:

1. Your research group's queue. For example, `#BSUB -q smith_queue`
2. The account to which your jobs will charge. For example, `#BSUB -P smith_lab`

</LinkableSection>

<LinkableSection id={"template-validation"} title={"Validating template configuration"}>

To run a Xenium Ranger pipeline in cluster mode, add the `--jobmode=slurm` command line option when using the `xeniumranger` commands. It is also possible to use `--jobmode=<PATH>`, where `<PATH>` is the full path to the cluster template file.

</LinkableSection>

<LinkableSection id={"cluster-mechanics"} title={"Cluster mode mechanics"}>

There are two subtle variants of running `Xenium Ranger` pipelines in cluster mode, each with their own pitfalls. Check with your cluster administrator to see which approach is compatible with your institution's setup.

1. **Run `Xenium Ranger` with `--jobmode=slurm` on the head node**. Cluster mode was originally designed for this use case. However, this approach leaves `mrp` and `mrjob` running on the head node for the duration of the pipeline, and some clusters impose time limits to prevent long running processes.
2. **Use a job script to submit a `Xenium Ranger` command with `--jobmode=slurm`**. With this approach, `mrp` and `mrjob` run on a cluster mode. However, the cluster must allow jobs to be submitted from a compute node to make this viable.

When `Xenium Ranger` is run in cluster mode, a single library analysis is partitioned into _hundreds_ and potentially _thousands_ of smaller jobs. The underlying Martian pipeline framework launches each stage job using the `sbatch` command when running on Slurm cluster. As stage jobs are queued, launched, and completed, the pipeline framework tracks their status using the metadata files that each stage maintains in the pipeline output directory.

Like _single server_ pipelines, cluster-mode pipelines can be restarted after failure. They maintain the same order of execution for dependent stages of the pipeline. All executed stage code is identical to _single server_ mode, and the quantitative results are identical to the limit of each stage's reproducibility.

<DocumentCallout>
<Text as={"span"}>Cluster-mode pipelines that are stopped (either by you or due to a stage failure) do **not** delete pending stages that have already been submitted to the cluster queue. As a result, some pipeline stages may continue to execute after the Xenium Ranger commands have exited.</Text>
</DocumentCallout>

In addition, the Xenium Ranger UI can still be used with cluster mode. Because the Martian pipeline framework runs on the node from which the command was issued, the UI will also run from that node.

</LinkableSection>

<LinkableSection id={"memory"} title={"Memory requests and consumption"}>

Stages in the Xenium Ranger pipelines each request a specific number of cores and memory to aid with resource management. These values are used to prevent oversubscription of the computing system when running pipelines in single server mode.
The way CPU and memory requests are handled in cluster mode is defined by the following:

- How the `__MRO_THREADS__` and `__MRO_MEM_GB__` variables are used within the job template.
- How your specific cluster's job manager schedules resources.

For clusters whose job managers do not support memory requests, it is possible to request memory in the form of cores via the `--mempercore` command-line option. This option scales up the number of threads requested via the `__MRO_THREADS__` variable according to how much memory a stage requires.

For example, given a cluster with nodes that have 16 cores and 128 GB of memory (8 GB per core), the following pipeline invocation command:

```
xeniumranger relabel --id=demo \
 --xenium-bundle=xenium-bundle \
 --jobmode=slurm \
 --mempercore=8
```

will issue the following resource requests:

- A stage that requires 1 thread and less than 8 GB of memory will pass `__MRO_THREADS__` of `1` to the job template.
- A stage that requires 1 thread and 12 GB of memory will pass `__MRO_THREADS__` of `2` to the job template because (12 GB) / (8 GB/core) = 2 cores.
- A stage that requires 2 threads and less than 16 GB of memory will pass `__MRO_THREADS__` of `2` to the job template.
- A stage that requires 2 threads and 40 GB of memory will pass `__MRO_THREADS__` of `5` to the job template because (40 GB) / (8 GB/core) = 5 cores.

As the final bullet point illustrates, this mode can result in wasted CPU cycles and is only provided for clusters that cannot allocate memory as an independent resource.

Every cluster configuration is different. If you are unsure of how your cluster resource management is configured, contact your cluster administrator or help desk.

**SGE memory:**

SGE supports requesting memory via the `mem_free` resource natively, although your cluster may have another mechanism for requesting memory. To pass each stage's memory request through to SGE, add an additional line to your `sge.template` that requests `mem_free`, `h_vmem`, `h_rss`, or the custom memory resource defined by your cluster.

```bash highlightedLines={[4]}
cat sge.template

## Expected output
#$ -N __MRO_JOB_NAME__
#$ -V
#$ -pe threads __MRO_THREADS__
#$ -l mem_free=__MRO_MEM_GB__G
#$ -cwd
#$ -o __MRO_STDOUT__
#$ -e __MRO_STDERR__

__MRO_CMD__
```

<DocumentCallout>
<Text as={"span"}>In the above example, the trailing G in the highlighted __MRO_MEM_GB__G is required by SGE to denote that mem_free is being expressed in GB units.</Text>
</DocumentCallout>

Note that the `h_vmem` (virtual memory) and `mem_free/h_rss`(physical memory) represent two different quantities, and that Xenium Ranger stages `__MRO_MEM_GB__` requests are expressed as physical memory. Using `h_vmem` in your job template may cause certain stages to be unduly killed if their virtual memory consumption is substantially larger than their physical memory consumption. It follows that we do not recommend using `h_vmem`.

If you do use `h_vmem` in a template, it is recommended that you use the `__MRO_MEM_GB_PER_THREAD__` or `__MRO_MEM_MB_PER_THREAD__` variables instead of `__MRO_MEM_GB__` and `__MRO_MEM_MB__`. To determine memory limits for a multicore job, SGE will multiply the number of threads by the value in `h_vmem`. The `__MRO_MEM_GB__` and `__MRO_MEM_MB__` variables already reflect the sum amount of memory across all threads needed to run the job. Using those variables as `h_vmem` will inflate the memory required for multi-threaded jobs.

**LSF memory:**

LSF supports job memory requests through the `-M` and `-R [mem=...]` options, but these requests generally must be expressed in MB, not GB. As such, your LSF job template should use the `__MRO_MEM_MB__` variable rather than `__MRO_MEM_GB__`. For example,

```bash highlightedLines={[4]}
cat bsub.template

## Expected output
#BSUB -J __MRO_JOB_NAME__
#BSUB -n __MRO_THREADS__
#BSUB -o __MRO_STDOUT__
#BSUB -e __MRO_STDERR__
#BSUB -R "rusage[mem=__MRO_MEM_MB__]"
#BSUB -R span[hosts=1]

__MRO_CMD__
```

</LinkableSection>

<LinkableSection id={"submission-rate"} title={"Controlling rate of job submissions"}>

Some Xenium Ranger pipeline stages are divided into hundreds of jobs. By default, the rate at which these jobs are submitted to the cluster is throttled to at most 64 at a time and at least 100 ms between each submission to avoid running into limits on clusters which impose quotas on the total number of pending jobs a user can submit.

If your cluster does not have these limits or is not shared with other users, you can control how the Martian pipeline runner sends job submissions to the cluster by using the `--maxjobs` and `--jobinterval` parameters.
To increase the cap on the number of concurrent jobs to 200, use the `--maxjobs` parameter:

```
xeniumranger resegment --id=sample ... --jobmode=slurm --maxjobs=200
```

You can also change the rate limit on how often the Martian pipeline runner sends submissions to the cluster. To add a five-second pause between job submissions, use the `--jobinterval` parameter:

```
xeniumranger resegment --id=sample ... --jobmode=slurm --jobinterval=5000
```

The job interval parameter is in milliseconds. The minimum allowable value is 1.

</LinkableSection>

Use Slurm to run stages on multiple nodes via batch scheduling

Cluster Mode

Job submission mode is one of three primary ways of running Xenium Ranger. To learn about the other approaches, see [computing options](/support/software/xenium-ranger/latest/release-notes/XR-system-requirements#computing-options).

Xenium Ranger can be run in _job submission_ mode, by treating a _single_ node from the cluster like a local server. This leverages existing institutional hardware for pipeline analysis.

<Image src={"https://cdn.10xgenomics.com/image/upload/v1679522871/software-support/Spatial-GEX/Sustaining/hybrid_mode.png"} /> 

<LinkableSection id={"job-scheduler"} title={"Step 1. Select job scheduler"}>

Select a job scheduler below to see a sample job script.

<DocumentCallout>
<Text as={"span"}>10x Genomics does not officially support Torque/PBS, SGE, or LSF. Sample job scripts are shown below.</Text>
</DocumentCallout>

</LinkableSection>

<LinkableSection id={"slurm-hybrid"} nested={true} title={"Slurm scheduler"}>

```bash highlight={true}
#!/usr/bin/env bash

# ==================================
# Job Script
# ==================================

#SBATCH -J {JOB_NAME}
#SBATCH --export=ALL
#SBATCH --nodes=1 --ntasks-per-node={NUM_THREADS}
#SBATCH --signal=2
#SBATCH --no-requeue
### Alternatively: --ntasks=1 --cpus-per-task={NUM_THREADS}
# ==================================
# Consult with your cluster administrators to find the combination that
# works best for single-node, multi-threaded applications on your system.
# ==================================
#SBATCH --mem={MEM_GB}G
#SBATCH -o {STDOUT_LOG}
#SBATCH -e {STDERR_LOG}

{PIPELINE_CMD}
```

</LinkableSection>

<LinkableSection id={"sge-hybrid"} nested={true} title={"SGE scheduler"}>

```bash highlight={true}
#!/usr/bin/env bash

#!!! This is not officially supported by 10x


# ==================================
# Setup Instructions
# ==================================
# # 1. Substitute {PE_NAME} below with name of your cluster's
# shared-memory parallel environment. If your cluster does not
# have a parallel environment,
# delete this line. However, the job will run with only 1 thread.

# ==================================
# Job Script
# ==================================

#$ -N {JOB_NAME}
#$ -V
#$ -pe {PE_NAME} {NUM_THREADS}
#$ -cwd
#$ -l mem_free={MEM_GB}G
#$ -o {STDOUT_LOG}
#$ -e {STDERR_LOG}
#$ -S "/usr/bin/env bash"

{PIPELINE_CMD}
```

</LinkableSection>

<LinkableSection id={"lsf-hybrid"} nested={true} title={"LSF scheduler"}>

```bash highlight={true}
#!/usr/bin/env bash

#!!! This is not officially supported by 10x


# ==================================
# Job Script
# ==================================

#BSUB -J {JOB_NAME}
#BSUB -n {NUM_THREADS}
#BSUB -o {STDOUT_LOG}
#BSUB -e {STDERR_LOG}
#BSUB -R "rusage[mem={MEM_MB}]"
#BSUB -R span[hosts=1]

{PIPELINE_CMD}
```

</LinkableSection>

<LinkableSection id={"torque-hybrid"} nested={true} title={"Torque/PBS scheduler"}>

```bash highlight={true}
#!/usr/bin/env bash

#!!! This is not officially supported by 10x

# ==================================
# Job Script
# ==================================

#PBS -N {JOB_NAME}
#PBS -V
#PBS -l nodes=1:ppn={NUM_THREADS}
#PBS -l mem={MEM_GB}gb
#PBS -o {STDOUT_LOG}
#PBS -e {STDERR_LOG}

{PIPELINE_CMD}
```

</LinkableSection>

<LinkableSection id={"update-script"} title={"Step 2. Update sample job script"}>

Copy the sample job script to a text editor, and replace all the variables enclosed within braces (for example, `{JOB_NAME}`or `{STDOUT_LOG}`) with literal names, paths, and values.

The last line, `{PIPELINE_CMD}` , is replaced by a Xenium Ranger command, specifying `--jobmode=local`, `--localcores={NUM_THREADS}` and `--localmem=0.9*{MEM_GB}` to restrict CPU and memory use that is consistent with the directives in the job script.

For example, if the job script requests 8 cores and 64 GB of memory from the cluster, then the Xenium Ranger command should include `--jobmode=local --localcores=8 --localmem=57`.

<DocumentCallout>
<Text as={"span"}>Since cluster setup and policy vary greatly from one institution to another, the sample job scripts provided below should be treated as a starting point. Consult with your local cluster administrator to see if additional directives are required.</Text>
</DocumentCallout>

</LinkableSection>

<LinkableSection id={"run-script"} title={"Step 3. Run sample job script"}>

If the sample job script is saved as `runJob.bash`, then following commands submits the job to the cluster for each of the corresponding job scheduler.

</LinkableSection>

<LinkableSection id={"slurm-run"} nested={true} title={"Run Slurm"}>

```bash highlight={true}
sbatch runJob.bash
```

</LinkableSection>

<LinkableSection id={"sge-run"} nested={true} title={"Run SGE"}>

```bash highlight={true}
qsub runJob.bash
```

</LinkableSection>

<LinkableSection id={"lsf-run"} nested={true} title={"Run LSF"}>

```bash highlight={true}
bsub runJob.bash
```

</LinkableSection>

<LinkableSection id={"torque-run"} nested={true} title={"Run Torque/PBS"}>

```bash highlight={true}
qsub runJob.bash
```

</LinkableSection>

Treat a single node from the cluster like a local server

Job Submission Mode

Xenium Ranger exposes a user interface (UI) for monitoring progress through a web browser. By default, this UI is exposed at an operating-system assigned port, with a randomly-generated authentication token to restrict access. Specifying the `--uiport=3600` option when using `xeniumranger` forces the UI to be exposed on port 3600, and the `--disable-ui` option turns off the UI.

This UI is accessible through a web interface that runs on the given port on the machine where the pipeline was started. The URL to use with the web browser is printed to the pipeline standard output and log files, and can also be found in the `[sampleid]/_uiport` file where the pipeline was launched.

<LinkableSection id={"understanding-the-ui"} title={"Understanding the UI"}>

When the pipeline runs, it will display the URL for the UI.

```
xeniumranger relabel --id=sample345 \
 --xenium-bundle=xenium-bundle \
 --panel=panel.json \



Martian Runtime - 4.0.10
Serving UI at http://host.example.com:5603/?auth=mcV3MKANWfNTERRGASgYV8aXskx-rSH7hxynAdsTieA

Running preflight checks (please wait)...
```

The UI becomes unavailable once the pipeline completes, unless the `--noexit=true` flag is used.

While a pipeline is running, you can open the url (i.e., `http://host.example.com:5603/?auth=mcV3MKANWfNTERRGASgYV8aXskx-rSH7hxynAdsTieA` in the example above) in your web browser to view the pipeline process graph.

<Image src={"https://cdn.10xgenomics.com/image/upload/v1691530192/software-support/Xenium-Ranger/xr1.6_relabel_graph.png"} />
 

Clicking on any of the graph's nodes will reveal more information about that stage in the right pane. This info pane is broken into several sections, and the topmost shows high-level details about the stage's execution.

This includes the state of the stage (running, failed, or complete), the fully-qualified stage name (`FQName`), the directory in which the stage is running (`Path`), the stagecode that is being run (the location of the Python package being run), and any information about parameter sweeping that may apply to this stage.

Clicking the arrow next to the stage name (i.e., `← XR_SETUP_INPUTS`) will return to the pipeline-level metadata view.

<Image src={"https://cdn.10xgenomics.com/image/upload/v1691530192/software-support/Xenium-Ranger/xr1.6_stages.png"} />
 

The **Sweeping** section allows you to view the MRO call used to invoke this stage (`invocation`) and information about the split and join components of the stage if it was parallelized.

<Image src={"https://cdn.10xgenomics.com/image/upload/v1691530192/software-support/Xenium-Ranger/xr1.6_sweep.png"} />
 

<SupportCallout level={"info"}>
<Text as={"span"}>[Martian](https://martian-lang.org), the pipeline framework used by Xenium Ranger, supports parameter sweeping for pipelines. The Forks and Permute fields in the Sweeping section would display information about different parameters being swept, but no Xenium Ranger pipeline currently performs parameter sweeping. These fields will always contain only trivial information as a result.</Text>
</SupportCallout>
 

The **Argument Bindings** and **Return Bindings** sections display the inputs and outputs of the stage.

<Image src={"https://cdn.10xgenomics.com/image/upload/v1691530192/software-support/Xenium-Ranger/xr1.6_bindings.png"} />
 

In general, only top-level pipeline stages (those represented by rectangular nodes in the process graph) contain return bindings.

The **Chunking** section displays information about the parallel execution of the stage. Many stages are automatically parallelized and process different pieces (chunks) of the same input dataset in parallel. For example, an input dataset could be split into multiple chunks for a given stage. This section would show when chunks had completed, are in flight, and are waiting for CPU and/or memory to become available before running.

<Image src={"https://cdn.10xgenomics.com/image/upload/v1691530192/software-support/Xenium-Ranger/xr1.6_chunks.png"} />
 

Clicking on an individual chunk exposes additional options for viewing metadata about that chunk's execution, including any errors, standard output, and in cluster mode the job script used to queue the job to the cluster. The `jobinfo` includes information about how a chunk was executed, selected environment variables, and for completed chunks various perfomance statistics such as peak memory usage and CPU time used. As with the **Sweeping** section, additional metadata associated with the chunk execution can also be viewed.

</LinkableSection>

<LinkableSection id={"launching-the-ui"} title={"Launching the UI for existing pipelines"}>

You can also examine pipestances that have already completed using the Xenium Ranger UI. Assuming your pipestance output directory was `/home/jdoe/runs/sample345`, simply rerun the `xeniumranger` command with the `--noexit` option to re-attach the UI:

```
xeniumranger relabel --id=sample345 \
 --xenium-bundle=xenium-bundle \
 --panel=panel.json \
 --noexit=true



Martian Runtime - 4.0.10
Serving UI at http://host.example.com:3600

Running preflight checks (please wait)...

Pipestance completed successfully, staying alive because --noexit given.
```

</LinkableSection>

<LinkableSection id={"accessing-the-ui-through-a-firewall"} title={"Accessing the UI through a Firewall"}>

If you run pipelines on a server that blocks access to all ports except SSH, you can still access the Xenium Ranger UI using SSH forwarding. Assuming you have a `xeniumranger` pipeline running on port `3600` on `cluster.university.edu`, you can type the following from your laptop:

```
ssh -NT -L 9000:cluster.university.edu:3600 jdoe@cluster.university.edu
jdoe@cluster.university.edu's password:
```

Upon entering a password (assuming you are `jdoe@cluster.university.edu`), the command appears to hang. However, in the background it has mapped port 9000 on your laptop to port 3600 on `cluster.university.edu` through the ssh connection for which you just entered your password.

This allows you to go to http://localhost:9000/ in your web browser and access the UI running on `cluster.university.edu:3600`. Once you are done examining the UI, use `Ctrl+C` in your `ssh -NT -L ...` terminal window to terminate this SSH forwarder.

A full explanation of SSH forwarding is beyond the scope of this guide, see [SSH/OpenSSH/PortForwarding](https://help.ubuntu.com/community/SSH/OpenSSH/PortForwarding).

</LinkableSection>

User interface (UI) for monitoring progress through a web browser

Pipeline Monitoring UI

Overview

Getting Started

Download Center

Xenium Ranger Commands

Analysis

Algorithms

Advanced

Troubleshooting

Release Notes

Xenium Onboard Analysis

Xenium Explorer

Example Datasets

Analysis Guides

Xenium Ranger

Learn more about input files required for Xenium Ranger

Inputs

Learn how to run Xenium Ranger subcommands.

Running Pipelines

Guidance for choosing a Xenium Ranger pipeline.

Choosing a Pipeline

Relabel

Modify the Xenium Onboard Analysis cell segmentation results.

Resegment

Import segmentation results from community-developed tools.

Import-segmentation

Learn more about output files generated by Xenium Ranger

Outputs

The Xenium In Situ software suite is a set of software applications for analyzing and visualizing in situ gene expression data produced by the Xenium Analyzer. Xenium Ranger provides flexible off-instrument reanalysis of Xenium In Situ data. Relabel transcripts, resegment cells with the latest 10x segmentation algorithms, or import your own segmentation data to assign transcripts to cells.

What is Xenium Ranger?

Learn about Xenium Ranger, software compatibility, and analysis workflows.

Getting Started with Xenium Ranger

New to Xenium Ranger?

We provide resources from protocols, user guides, and free-to-use analysis tools.

View the latest updates to Xenium Ranger algorithms.

View the latest updates to Xenium Ranger.

Learn more about Xenium In Situ instrument analysis software.

Visualize data from Xenium In Situ solutions.

Browse Q&As from the 10x Genomics support team.

Access free, publicly available data generated with Xenium In Situ solutions.

A collection of introductions, tutorials, and blogs for data analysis beyond 10x Genomics software.